How to Maximize The Role of Geotextile
Geotextile is a kind of impermeable material commonly used in construction materials. The use of geotextile makes the effect of construction engineering can achieve good results, so it is widely welcomed and purchased by people. We must take the correct steps when using geotextile produced by filament nonwoven geotextile manufacturers Only by careful laying can the effect of the geotextile be maximized.
With artificial roll paving, the nylon fabric should be smooth, and the deformation should be properly left. Anchorage, stitching, and electric welding are usually used for the installation of polyester yarn or short wire high quality polyester nonwoven geotextile. The total width of the suture and its electric welding is generally about 0.1m, and the total width of the anchor is generally about 0.2M. The long-term exposed composite geomembrane should be welded or sutured.
The stitched composite geomembrane stitching most includes each row of closed-circuit television lock chain stitching method. The thread used for the future should be a composite resin with a very small tension exceeding 60N, and has the same or spanning biological resistance as the composite geomembrane. Learn corrosion and its anti-ultraviolet light competitiveness. At the construction site, the composite geomembrane should be anchored by volcanic rock, and the composite geomembrane at the top of the impermeable membrane should be a seam or electric welding.
Use a hot air gun to heat the butt of the two fabrics at a high temperature to make the unit reach the melting shape, and immediately use the obvious force to make it firmly adhere. Sutures required for composite geomembrane: If the sutures must be selected for the docking of composite geomembrane goods, the sutures must be of the same or more than the composite geomembrane material.
Pay attention to the maintenance of the equipment or the composite geomembrane in the rock cover. The damage and repair of the composite geomembrane are at the sutures. The composite geomembrane must be repaired again by sutures, and the result of some stitches at the repair port has been sutured again.
The work of laying geotextile can be omitted but can not be carried out casually. The laying of geotextile produced by polyester nonwoven geotextile manufacturers needs to be smooth and not damaged, so that the service life of geotextile can be longer, in order to increase the geotextile The anti-aging properties of cloth are best laid by embedding method.
Geotextiles are water-permeable geosynthetic materials made of synthetic fibers by needle punching or weaving. Geotextiles are generally preserved after production and then sold at a suitable opportunity. There are some specialties in storing geotextiles And precautions. Let’s take a look at what matters we should pay attention to.
When we move the geotextiles produced in the workshop, the polypropylene nonwoven geotextile for sale is usually in rolls. Although the geotextile is quite heavy, we suggest that it be carried by two people, and do not drag it hard, otherwise, the geotextile roll will be damaged to varying degrees, and if dragged later.
The geotextile will wear out when it comes into contact with the ground, and the original white geotextile will turn black at this time. Once worn, geotextiles that are severely damaged can no longer be used, because they will affect the construction, and geotextiles that have been exposed to leaked chemical agents cannot be used.
When using machinery for transport operations, be careful not to break the high quality polypropylene nonwoven geotextile roll. If the geotextile is physically damaged, it must be inspected before construction to ensure that there is no damage before proceeding. At this point, you must not be careless, because it is related to the final construction quality of the person concerned.
When storing geotextiles produced by polypropylene nonwoven geotextile manufacturers, usually several rolls are stored together, which is more space-saving, but its stack height is limited, not more than 6 circles and the roll identification sheet can be seen, Should be placed in a flat place without water accumulation.
No matter where the geotextile is placed, it is to avoid the invasion of dust. If the filament nonwoven geotextile factory price is placed outdoors, you must pay attention to the influence of some external conditions. It is recommended to cover the material with some thick materials, which can be effective. Avoid the influence of external factors such as sunlight and rain.